SPRAY BUFFING PROCEDURES

Spray buffing is a procedure used to restore the gloss to the 20% of the floor that gets 80% of the traffic.  The traffic lanes.  Before spray buffing it is necessary to dry clean and wet clean the floor to insure that soil is not buffed into the floor finish.

HOW OFTEN SHOULD YOU SPRAY BUFF?
WHAT TYPE OF SPRAY BUFF MATERIAL SHOULD YOU USE?

1. Wet Floor Signs
2. Rotary Floor Machine
3. Spray Buffing Pad

1. SPRAYBUFF

1. Dust mop the floor using the dry cleaning procedures.
2. Position wet floor signs.
3. Always wear protective goggles and gloves when handling cleaning chemicals.
4. Wet clean the floor by damp mopping, wet mopping or automatic scrubbing 
5. Attach a red buffing pad to the rotary floor machine.
6. Using a spray bottle, apply a fine mist of SPRAYBUFF on a small section of the floor.  Buff the sprayed area using overlapping strokes.   Continue buffing until the desired gloss is achieved.  Continue until the entire area has been spray buffed.
7. Dust mop the floor to remove any loose debris.
8. Remove wet floor signs.
9. Clean all equipment and return to storage area.

• Always wear Personal Protection Equipment (PPE).
• Use caution signs as floor surface may become extremely slippery.